Your Premier Car Tweeters Manufacturer in China
MR AUDIO has been producing high-quality car tweeters in China for more than 20 years. We can provide a one-stop solution to your car tweeters’ requirements.
- Acquired various national patents
- Guaranteed high-quality with a 2-year warranty
- More than 400,000 speaker sets per year
- Professional R&D team
MR AUDIO as Your Primary Car Tweeters Supplier
MR AUDIO is a certified car tweeter manufacturer in China. We have more than 20 years of experience in the industry. As a professional manufacturer and supplier in China, we offer the best quality products at a reasonable cost. We guarantee that all our car tweeters can produce perfect sounds. All our car tweeters are manufactured with superior design. The raw materials are highly inspected before production. Therefore, you can assure premium quality. We also offer customization services to meet your requirements. Send your inquiries today!
MR Audio Your Exclusive Shallow Subwoofer Manufacturer
- supper tweeter
- Nominal Impedance: 4-8 Ohms
- Rated AES Power Handling (RMS): 30 Watts
- Frequency Range: 1.5kHz-20kHZ
- Sensitivity (1W/1m): 91 dB
- Voice Coil Diameter: 1.0 in/25mm
- supper tweeter
- Nominal Impedance: 4-8 Ohms
- Rated AES Power Handling (RMS): 30 Watts
- Frequency Range: 1.5k-20kHZ
- Sensitivity (1W/1m): 90 dB
- Voice Coil Diameter: 1.0 in/25mm
- supper tweeter
- Nominal Impedance: 4-8 Ohms
- Rated AES Power Handling (RMS): 30 Watts
- Frequency Range: 3k-20kHZ
- Sensitivity (1W/1m): 91 dB
- Voice Coil Diameter: 1.0 in/25mm
- 1 inches tweeter
- Nominal Impedance: 8 Ohms
- Rated AES Power Handling (RMS): 35 Watts
- Frequency Range: 1.0k-20kHZ
- Sensitivity (1W/1m): 96 dB
- Voice Coil Diameter: 1.0 in/25mm
- 1 inches tweeter
- Nominal Impedance: 4-8 Ohms
- Rated AES Power Handling (RMS): 20 Watts
- Frequency Range: 1.5k-20kHZ
- Sensitivity (1W/1m): 94 dB
- Voice Coil Diameter: 1.0 in/25mm
- 1 inches tweeter
- Nominal Impedance: 4-8 Ohms
- Rated AES Power Handling (RMS): 20 Watts
- Frequency Range: 1.5k-20kHZ
- Sensitivity (1W/1m): 90 dB
- Voice Coil Diameter: 1.0 in/25mm
What is the best car tweeter installation location?
The tweeter should be installed as flat as the human ear as far as possible, such as on the A-pillar of the car, or above the instrument panel, and some models are located on the door, so that the sound field is basically flat with the human ear, and the car owner can also better appreciate the music. Brings the charm.
Does the installation of a tweeter in a car affect the car?
There is no impact on the car. The tweeter generally only provides high-pitched sound above 1500hz, and the required power is not large, so there is no need to use a power amplifier to push it, and the installation is very convenient.
You only need to break open the speaker cables behind the pair of speakers that need to be added with a tweeter, then bridge the two wires, and connect the two wires to the tweeter to make the sound.
MR Audio - Your Professional Car Tweeter Manufacturer in China
Do you want to get the best power amplifier from China’s best company? MR AUDIO is the one for you. We’ve been working for over 20 years to give the most comprehensive services necessary to increase your business rate.
Our car tweeter features the cutest design and style. It’s available in various sizes to fit your specific speaker’s needs. Can purchase it with the smallest amount of funding.
The most well-known brand in the world awarded the car tweeter the highest honor. We put our expertise to work in offering excellent service through our products.
Customers can get free packaging design for their speakers from MR AUDIO, which is more by their products and markets. We also offer one-stop warehousing, logistics, customs declaration, and customs clearance service.
If you want to include a car tweeter in your business, MR AUDIO is the way to go! Any OEM and ODM services are welcomed with open arms.
You can reach out to us at any time. We hope to create a long-term, mutually beneficial business partnership with you.
MR AUDIO is also available to you 24/7 hours to address all of your needs.
Why Choose MR Audio
- Workshop
- Exhibition Display
- Certificate Display
Recommend Product MR Audio Can Support You
A Distinctive Car Tweeter
Mico is an Italian customer that Chuck met at the Dubai exhibition. After several cooperations with us, due to trust, he sent us the car tweeter products that he had purchased in cooperation in the past. Because this product has excellent sound quality, they can’t find it temporarily to substitute products, but Mico wants to change the color of its appearance to meet the needs of more customers. He hopes that we can produce and sell similar products, expand import channels, and strive for more profit margins for them.
After receiving the sample, we immediately performed a trial listening. That is indeed a superb tweeter. After comparing with our product, we believe that our original diaphragm can be replaced with a titanium diaphragm, which can bring more sharp treble. Then after the trial assembly, it did reach the sharpness we wanted, but some parts were accompanied by a sizzling sound. After thinking about it, we switched to a PEN diaphragm again.
For this level of speakers, the most important thing is the accuracy of all aspects of the product. We need to control the deviation value of each part of the machine within 0.5mm. For this reason, we have built a new and more sensitive machine tool. Although the cost is higher, we strive to be perfect once we start.
After the machine tool was built, we tested the first batch of products manufactured by it, and the results were satisfactory. The decibel error was within 2db. The high degree of consistency gave us confidence in export.
Now comes the hardest step: changing the color, which is the initial request of the customer. Usually, we use the traditional spray paint method. However, the color of the spray paint cannot achieve our desired effect. The color saturation is too high to highlight the sense of high quality. Moreover, the glossy paint is no different from other ordinary products. As a result, the previous efforts on the sound quality and details will be difficult for customers to notice. Make the product indistinguishable from other products. After this matter was temporarily shelved for a week, the design department proposed that anodizing technology can be used, the layer of the oxide film of various colors can be directly coated on the speakers by chemical methods. Not only does the color have more layering, but also It can greatly increase the surface hardness, wear resistance, etc., expand the scope of application, and extend the service life. The recognition is also stronger.
This is the first time we have used anodizing. Although we have no experience, we have done this coating with the greatest effort, and the products obtained are quite satisfactory. The matte appearance has greatly improved the texture. Then in the subsequent test, the quality inspector asked whether the curvature of the speaker cone can be adjusted slightly, and the directivity may be more obvious.
Try it now! The factory has polished a set of car tweeter models again, probably reduced by two degrees, and successfully increased the sensitivity of the sound. Although there are only slight changes, this sense of accomplishment is incomparable.
MR AUDIO as Your Leading Car Tweeters Manufacturer in China
MR AUDIO is a trusted car tweeter manufacturer and supplier in China for over 20 years. We work with experts and professionals to create the highest quality car tweeters. For your business or project, choose MR AUDIO to supply you with affordable yet high-quality car tweeters.
Here in MR AUDIO, you can find the largest collection of car tweeters. We manufacturer all types of car tweeters. You can purchase both standard and custom-designed car tweeters to meet your requirements.
All our car tweeters are manufactured using our advanced production line. We also have automated testing equipment in our factory. Rest assured that you can purchase reliable quality and fewer defective products.
As a professional manufacturer, we have deep knowledge of the car speaker industry’s market dynamics. Thus, we manufacture based on the latest trends to provide accurate designs for various applications.
At MR AUDIO, you can guarantee a car tweeter that provides high-frequency elements to the music. Here are some benefits offered by MR AUDIO car tweeters:
- High-quality overall sound quality
- Crisp and clear sound even in an extreme volume
- Offers subtle musical details
- High power handling
- Loud frequency sound
- Adjustable crossover
- The compact structure that can fit any type of vehicle and small spaces
- Durable and attractive design
Are you a retailer, distributor, or wholesaler of car tweeters? Choose MR AUDIO as your manufacturer and supplier. We offer the best deals and values to our customers around the world.
If you purchase car tweeters from MR AUDIO, you can guarantee affordable prices, fast delivery, fast lead time, a two-year warranty, free packaging design, after-sales support, and the best services.
Aside from that, we offer low MOQ to support your business. Here in MR AUDIO, we are committed to providing you with excellent quality products to meet your applications and boost your business. Choose MR AUDIO as your trusted partner.
Besides car tweeters, we also produce an active subwoofer, passive subwoofer, waterproof subwoofer, bullet speaker, professional speaker, speaker cable, compression horn, horn tweeter, ceiling speaker, and more.
Contact us for your next car tweeter orders!
- When washing the car, keep in mind to prevent the tweeterfrom getting wet. If you find that ithas entered the water, quickly dry it with an air gun.
- Try not to always honk the tweeterfor a long time, which will simply cause premature ablation of the horn contacts.
- Try to seek a professional if the tweeterappears faulty.
- Loosen the fixing nut of the tweeteradjusting screw, and then turn the adjusting nut. The direction of rotation will vary depending on the function it, so it’s hard to say which side to turn to, but you have to turn it a little first, then try pressing the car stereo to see, and then turn it further.
- Fix the adjusting nut at the best place for the tweetersound.
- Fix the fixing nut of the screw.
- If the volume is insufficient, measure the voltage at the terminals connected to the car audio speakers.
- The paper cone has the advantages of natural sound, low cost, good rigidity, light material and high sensitivity, etc. The disadvantage is that the moisture resistance is poor and the consistency is difficult to control during manufacture.
- Bulletproof cloth, with wider frequency response and lower distortion, is the first choice for those who love strong bass. The disadvantages are high cost, complicated production process, low sensitivity and less ideal light music effect.
- The wool woven coneis soft in texture. It is very good for soft and light music, but the low sound effect is not good, and it lacks strength and shock.
- Polypropylene cone, with good consistency and low distortion, is widely used in advanced car tweeters.
In addition, some advanced car speakers also use new materials such as PPTA barriers and polyetherimide mid-range cones.
At present, the popular car speaker diaphragm materials on the market include paper cones, plastics, metals and synthetic fibers. There are many subdivided materials, such as glass fiber, wool basin, carbon fiber and so on.
Different car tweeter diaphragm materials have different timbre performance and can be used in different application scenarios. At present, the paper cone diaphragm is the most used in the market. This type of diaphragm has the advantages of low cost, stable performance and uniform tone
- Contact ablation: If the horn is pressed for a long time, it is easy to cause the contact of the horn to ablate and generate impedance, the current flowing through the electromagnetic coil is weakened, and the decrease in electromagnetic suction cannot attract the armature to drive the diaphragm to vibrate normally, resulting in hoarse or even no sound.
- Poor contact of electromagnetic coil terminals: Some horn internal electromagnetic coil enameled wire terminal joints are connected by aluminum metal rivets crimping, which is not reliable welding connection. Virtual connection failure, resulting in poor speaker operation.
- The seal is not tight and it is easy to get wet: Although the inside of the horn is airtight, if the seal is not tight and there is water vapor in the air in the car wash, the water vapor can easily cause the contacts to get wet and not work properly.
The overall sound effect of the car has stricter requirements on the quality of the speakers. In fact, the requirements for the installation and modulation process are more stringent. That is to say, if the speakers are good, the sound quality may not be good, which has a lot to do with the debugging skills of the technicians.
In addition, there are also the car host, power amplifier, frequency divider, sound insulation, etc., which will affect the overall sound effect of the car.