SBWF1815
15″SUBWOOFER
- 2+2Ω nominal impedance
- 1.8+1.8Ω minimum impedance
- 4000 RMS capacity
- 2000 AES capacity
- 82 dB sensitivity
- 27-500 Hz response
- 100mm(4in) inside-outside voice coil
SBWF1815 frees up plenty of driving space for high-power amplifiers. Designed for sound systems that pursue extreme low-frequency performance. Deep diving low frequency full and powerful. Driven by strong power, it still presents stable output, strengthens heat dissipation and reliability, and is easy to operate even under high loads for a long time. 15–inch hardcore choice, low–frequency power is under control!
- GENERAL SPECIFICATIONS
- THIELE-SMALL PARAMETERS
- EXTRA INFO
| Nominal Diameter | 15/403in/mm |
| MAX Power | 8000 Watts |
| RMS Power | 4000 Watts |
| Impedance | 2+2 Ohm |
| Resonance Frequency | 27 Hz |
| Frequency Response | 27-500 Hz |
| Sensitivity(1W/1m) | 82 dB |
| Voice Coil Diameter | 4”/100mm |
| Voice Coil Material | BASV |
| Magnet | 265 Oz |
| FS | 27 Hz |
| RE | 2+2 ohm |
| Qms | 5.2 |
| Qes | 0.66 |
| Qts | 0.58 |
| BL | 22 T/m |
| MMS | 905 grams |
| Xmax | 29 mm |
| Sd | 780 cm² |
| Efficiency | 0.09 % |
| Overall Diameter | 15/403 in/mm |
| Bolt Circle Diameter | 14.9/381 in/mm |
| Baffle cutout Diameter | 14/359 in/mm |
| Depth | 9.6/247 in/mm |
| Net Weight | 28.5 kgs |
| Shipping Weight | 29.8 kgs |
| Shipping Box | 50X50X29cm |
Highlights
- 4”Inside/Out BASV voice coil wound on fiberglass former for hi-temp performance
- 8,000 watts max power continuous program power rating makes high acoustical output
- Smooth lines, minimalist design.
- 82 dB sensitivity, which makes it capable of generating a lot of output!
- Excellent low-frequency ability, high fidelity response
The thickness of the magnet has increased by 10mm, in order to have a larger heat dissipation area, at the same time, the pole core sticks to the heat sink, brushes the heat dissipation glue. We also applied the waterproof center heat-dissipating glue on the diaphragm to improve the waterproof performance.
MR Audio-Your Reliable 15″ Subwoofer Manufacturer in China
This product has been always on the shipping list for our customers in the Caribbean countries and has been repurchased.
At the beginning, we just learned from our old friend Abdullah that although the previously exported speakers met their needs, but because of the different ways of use, no matter what speakers are used, their service life in the local area is far less than in other countries. It turns out that they have a car speaker competition agreement, that is, everyone gathers on the open flat ground, turns on the car speaker to the maximum, and the powerful sound waves will continue to impact the eardrums. Although this is not a traditional program, it is also a customary way to relax. After all, a speaker is an electrical appliance. No matter how good the quality is, it must be adjusted to local conditions. The high temperature and humidity environment and high-intensity work require us to make some changes.
Therefore, the engineer held another small meeting to summarize the current problems and areas that need to be improved:
- Strengthen heat dissipation performance
- Add waterproof function
- Increase power as much as possible
We make the thickness of the magnet has increased by 10mm, in order to have a larger heat dissipation area, and in this way, the power has also been greatly improved. At the same time, the pole core sticks the heat sink and brushes the heat dissipation glue, two-pronged. We also applied the waterproof center heat-dissipating glue on the diaphragm to improve the waterproof performance.
It is worth mentioning that this product once won the first place in a speaker competition in Panama, not only because of its high power and stable output. More because it can still maintain its original performance in the hot and humid tropical rainforest summer.
This is inseparable from the dedication of every factory worker, who insists on strict quality inspection and updating of each product. Including our heat-dissipating glue, it needs to be hand-painted by old workers with more than ten years of experience, and no sloppy details can be cast in order to cast a perfect product.